|
Developer Hub
版本
文档
中文 (简体)
加载中...
版本
dfw
7.11.0
Device Firmware
Haply 设备的官方固件,提供最新功能、性能改进和稳定性更新。专为开发者和高级用户设计,帮助设备保持最佳运行状态。
v7.11.0
发布时间
2026年11月9日
于 下午2:42
发布说明
🔖 版本 7.11.0
7.11.0
(2026-11-09)
Bug Fixes
在 0xBC 0x44 上通告设备配置变更 (
2e87eaf
)
bigverse:
为编译移除 #endif (
4cade3e
), closes
#endif
bigverse:
仅接受本次会话的电机驱动器校准 (
e68ab2e
)
bigverse:
为调试版本的 UART 执行器添加 diagnostic_targets() (
2bd7142
)
bigverse:
在校准时从 IMU 采集重力,而非每 10 ms 采集一次 (
38b6116
)
bigverse:
修改脚本中用于调节 a2 与 b2 连杆之间关节弹簧辅助的数值 (
e9a106d
)
bigverse:
连杆丢失和 24V 掉电时清除电机驱动器校准 (
22ffe90
)
bigverse:
仅为 BIGV 编译 UART 电机后端 (
bc44e3f
), closes
#ifdef
bigverse:
像 MinVerse 一样完成校准,并每 5 秒记录一次状态 (
bb1ff07
)
bigverse:
解决合并冲突 (
63c6540
)
bigverse:
来自主板的电流读数——仍需调校 (
54ce3bd
)
bigverse:
禁用力迹捕获并关闭 IMU 调试日志 (
ec8fac8
)
bigverse:
在 BigVerse 上禁用 FOD 错误电机提示音 (
e2328ae
)
bigverse:
移除过时的 BIGV 开机校准标志默认值 (
99a4b69
)
bigverse:
启用 FOD,并将关节扭矩限制在 200 mNm 以便台架测试 (
3b853e9
)
bigverse:
在 BigVerse 上默认启用关节弹簧辅助 (
521ce16
)
bigverse:
启用 jointSpringAssist 标志 (
cd3fe7a
)
bigverse:
修复测试 (
cebcd8b
)
bigverse:
使 a1 与 b2 之间的角度同样具备弹簧辅助功能 (
453ab6a
)
bigverse:
像 MinVerse 一样处理 IMU(q_init,无连续模式) (
0cadfb5
)
bigverse:
使用电机驱动器的机械制动保持电子刹车 (
e33ff7b
)
bigverse:
在 UART 执行器后端中支持 DRYRUN (
4cc6a60
)
bigverse:
持续向每个电机驱动器发送帧,并控制制动释放节奏 (
b0d34b2
)
bigverse:
在 BigVerse 上保持关节弹簧辅助关闭 (
6cf10f7
)
bigverse:
调整运动学和力输出,以匹配金属版设备 (
388aef3
)
bigverse:
记录电机链路状态,用于诊断安全制动期间的驱动器掉线 (
4495b18
)
bigverse:
根据电机驱动器状态标记校准完成 (
ac58a8f
)
bigverse:
为新电机驱动器添加新的日志消息 (
af357a6
)
bigverse:
质量与质心的新数值——仍在开发中 (
9ca05a8
)
bigverse:
质量的新数值——重力补偿效果良好 (
7e51197
)
bigverse:
用于重力补偿调校的新查看器 (
e148053
)
bigverse:
位置控制已可工作——position_contropl 脚本仍在开发中 (
44e2d6e
)
bigverse:
同时打印 is_folded 函数 (
6d84d3a
)
bigverse:
退出光标位置控制时重新启用关节弹簧辅助 (
3ffcb02
)
bigverse:
主电源掉电后重新校准所有电机驱动器 (
3802c68
)
bigverse:
用户以 3 cm 拉动且无施力时释放机械制动 (
047e261
)
bigverse:
恢复实测质心力臂(BIGV_CM_SCALE = 1.0) (
215a794
)
bigverse:
恢复在变基到 beta 分支时丢失的 X2 #endif (
a7f0b2d
), closes
#endif
#endif
#elif
#if
#elif
#else
#ifdef
#endif
#if
#endif
#endif
#ifdef
#endif
bigverse:
将连杆质心力臂按 50% 缩放以用于重力补偿 (
d75f493
)
bigverse:
为 Index 控制器负载将安全速度阈值降低 20% (
8f470b0
)
bigverse:
根据配置的工具质量调整 FOD 耦合置信度 (
45fb542
)
bigverse:
关闭调试日志,并为电机驱动器 UART 事件命名 (
e54bade
)
bigverse:
更新测试 (
9d27662
)
bigverse:
更改世界坐标系参考,使 make 生成的所有演示与 inverse3 保持一致 (
43abda7
)
bigverse:
抽出时扭矩归零,并对连杆丢失和驱动器错误作出响应 (
e4d1cc5
)
build:
恢复 Inverse3_debug 为默认 PlatformIO 环境 (
9f9ca06
)
cursor:
位置控制中 IK 失败时不再重置 PID (
0c4e0fe
)
debug:
与 BIGV 一同恢复 INV3 调试 UART (
46dc130
), closes
#ifdef
#ifdef
禁用力迹捕获,使调试控制台可接受命令 (
39febb9
)
gravity:
开机时应用 EEPROM 中的工具质量,忽略旧版 0.75 缩放 (
6466eae
)
minverse:
移除每个 tick 的 [MINV command] 调试日志 (
6f84798
)
应答设置命令后从 SETUP 返回 IDLE (
b4a4fb3
)
功能特性
bigverse:
adapt driver_actuators_uart for torque-out/position-in over UART (
00bc269
)
bigverse:
add BIGV branches to force_output_decay + verify motor/serial mapping (
d1361ac
), closes
#if
#elif
X2/#else
#ifdef
bigverse:
add BIGV branches to force_output_decay.cpp (
ee8d480
), closes
#if
#elif
#if
bigverse:
add BIGV main-board pin constants, disambiguate dead placeholders (
b48ec41
)
bigverse:
add link-rate telemetry and bring-up diagnostics tooling (
e0ae0a1
)
bigverse:
add live kinematics viewer with joint controls - first solution functionnal - still wip (
4da8eb6
)
bigverse:
add script for joint spring (
9e3262c
)
bigverse:
add standalone BNO055 + status LED bring-up test (
10dd705
)
bigverse:
add support for joint spring monitoring for bigverse (
b8b0219
)
bigverse:
adjust home position (
51e8025
)
bigverse:
change the maximum values in device_profile - taking the driver values instead of mechanical team (
e318308
)
bigverse:
clamp the send torque command at 16 kHz (
3f60e7f
)
bigverse:
disabling FOD safeties (
3b18e30
)
bigverse:
fix bandit linter error (
b1cfe08
)
bigverse:
fix BIGV main-loop throttle, power sensing, and gear-ratio handling (
96dcdcf
), closes
#endif
bigverse:
force feedback that goes in the right directions (
bd67675
), closes
#ifndef
bigverse:
frequency rate on the tools (
e823153
)
bigverse:
hw test for sending torques command at 16kHz - functionnal with new Fw driver (
58d0bd6
)
bigverse:
implement FL1 motor UART protocol with DMA transport (
139c83b
)
bigverse:
initial framework (
3530e17
)
bigverse:
mechanical values update (
0e42f62
)
bigverse:
mechanical values update - still some values to be confirmed / tunned (
162068c
)
bigverse:
new hw test for testing the uart connection between main board and drivers - Tx and Rx works at low frequency with these tests (
a9afc91
)
bigverse:
Phase 1 firmware preparation for BigVerse (-DBIGV) (
025e453
)
bigverse:
removed every feature by default (
c19e1d2
)
bigverse:
sequence motor-drive calibration one at a time (
3f1f439
)
bigverse:
update comment (
50b8aa6
)
tools:
add support for english display in live_viewer script (
d8c59e7
)
回滚
回滚 "fix(bigverse): accept only this session's motor-driver calibrations" (
4092c86
)
所有下载
此版本的所有可用下载:
设备固件 7.11.0 InverseX
制品:
inverse-firmware_InverseX.zip
下载
设备固件 7.11.0 InverseH
制品:
inverse-firmware_InverseH.zip
下载
设备固件 7.11.0 Inverse3
制品:
inverse-firmware_Inverse3.zip
下载
设备固件 7.11.0 Minverse
制品:
inverse-firmware_Minverse.zip
下载
返回 dfw 版本列表